Products
- Other Electrical Instruments[8]
- Other Measuring & Analysing Instruments[5]
- Other Electrical Equipment[1]
- Testing Equipment[3]
- Other Electronic Measuring Instruments[2]
- Fiber Optic Equipment[2]
- Electricity Generation[1]
- Power Distribution Equipment[2]
- Other Analysis Instruments[1]
- Temperature Instruments[1]
- Sensors[1]
- Pressure Transmitters[1]
- Pressure Sensors[1]
Contact Us
- Contact Person : Ms. Zhong Eileen
- Company Name : Shandong Kehui Power Automation Co., Ltd.
- Tel : 86-533-3818805
- Fax : 86-533-3818800
- Address : Shandong,Zibo,No.16, Sanying Road
- Country/Region : China
- Zip : 255087
Products List
Over head cable Travelling Wave Fault Location System
Fault distance measurement error is less than 500m irrelevant of line length,can be usedin all kinds of power lines
The XC2100 consists of the traveling wave data acquisition unit XC-100 installed at substations, the master station which runs traveling wave analysis software...
High performance & multifunction OTDR
35dB /37dB high dynamic range
1m extra-short event dead zone
10.05m high distance resolution,128k sampling points
General Specifications:Dynamic rangePlease refer to "OTDR modules specifications"Distance uncertainty±(0.75m + sample space + measurement...
Cable Identification
It consists of a transmitter and a receiver and can be used to locate trace for underground cables and metallic pipes.
Features:Transmitter:Three output modes:Direct connection outputClamp coupling outputRadiation outputSix Frequencies to choose: 500Hz,1kHz, 8kHz, 33kHz, 66kHz,...
Portable Telecom Line Tester
It can quickly check telephone line fault with high safety & multi-functions capability. Easy operate, high reliability.
Main Functions and Key Features1. Telephone line fault checking2. ISDN/ADSL identification3. Hand free function (two speak ways, loudspeaker)4. Calling...
underground Power Cable Fault Locator
1, Pulse Reflection Method
2, Impulse Current Method
3, Large LCD dispaly.
Specification:Voltage of transmitting pulse:30VWidth of transmitting pulse:40 ns - 3.56 μsVoltage withstand: 400V AC (50/60Hz)Output impedance:5 - 80 OhmMeasuring range: 0 – 16 kmSampling...
Locator
T-903 can be used to locate all kinds of power cable faults using the TDR, ICM and SIM methods.
T-905 Power Cable Fault Locator is a portable, easy to use, single-phase unit for cable fault pre-location by using the Time Domain Reflection (TDR) method on low, medium and high...
High Voltage Surge Generator
High surge voltage up to 32 kV
Secondary Impulse Method and Impulse Current Method switch
Specification:Mains supply:230V±20%Mains frequency:50HzMax. power consumption (at short circuit):1500WMax. output voltage:32kVMax. surge energy:1000JImpulse cycle:4 - 30s...
FTR-01H Portable Digital Fault Recorder and Analysis System
FTR-01H series portable digital fault recorder and analysis system which has been widely applied to power system
Main Specifications system: Embedded LINUX operation system, memory: 256M, Hard disk: 160G, roll-storing 1000 the newest...
Power cable fault locator
Combines Time Domain Reflectometer (TDR), Impulse Current Method (ICM) and Secondary Impulse method (SIM) for fault detection,
...